Deckfast Fascia System
Fastening System for PVC and Composite Deck Fascia Boards
DECKFAST® Fascia System for PVC and composite deck fascia boards is designed to accommodate the large amount of expansion and contraction that can occur with deck fascia. The precisely engineered Fascia System has two components: the patented pre-drilling and countersinking Fascia Tool and specially designed, color matched, Fascia Screws.
The Fascia Tool creates an over-sized hole for the Fascia Screw, so that the fascia board hangs from the screw without applying a large amount of force on the fastener. Fascia Screws are available in both Headcote® stainless steel or epoxy coated carbon steel.
Approved for use with ACQ treated lumber. Follow the decking manufacturer’s recommendation when selecting either stainless or epoxy coated screws.
Application and Usage Notes
Follow the deck fascia board manufacturer's installation instructions. The Fascia System is designed for use with fascia boards from 1/2" to 3/4" thick. Use the Fascia Tool to pre-drill and countersink all holes in the fascia board. The hole is complete when the stop collar stops spinning. Set the fascia board in place and fasten with Fascia Screws. Drive screws until flush with the fascia board; do not over-tighten. The fascia board should hang from the screws to allow for expansion and contraction.